Turbosound NuQ122-WH ลำโพง
Turbosound NuQ122-WH ลำโพง
Turbosound NuQ122-WH ลำโพง


รหัสสินค้า: NuQ122-WH ประเภท: ลำโพง

ตู้ลำโพง 12 นิ้ว 2 ทาง 1,600 วัตต์

ราคาปกติ 0 บาท

ราคา 28,900 บาท

--Infinity% OFF

*ส่วนลด -28,900 บาท

บริการขนส่ง Shipping Provider
ซื้อสินค้า, สอบถามข้อมูล, เช็คสต๊อค Order Channel

Free Shipping

จัดส่งฟรี ทั่วประเทศ

Free Tech Support


Free Product Warranty



  • กรุณาเช็ค Stock สินค้ากับเจ้าหน้าที่ ก่อนสั่งซื้อทุกครั้ง
  • ไม่สามารถนำส่วนลดเปลี่ยนเป็นเงินสดได้
  • หากมีการเปลี่ยนแปลงโปรโมชั่น ทางบริษัทของสงวนสิทธิ์ในการที่ไม่ต้องแจ้งให้ทราบล่วงหน้า



The 2 way full range NuQ122 is a switchable passive/bi-amp 1,600 Watt 12″ loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the NuQ122 provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. The symmetrical trapezoidal shape and high frequency dispersion pattern also make the NuQ122 an obvious choice for mirrored left/right monitor wedge placement.

The NuQ122 loudspeaker features a 12″ low frequency driver with a low mass voice coil for improved transient response, and an aluminium dome 1″ neodymium high frequency compression driver mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON* NL4 connectors for input and link connections to additional enclosures.

Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (⅝”) birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. An optional flying yoke allows for further flexibility in install applications (available separately). The NuQ122 also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport.

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12″ (316 mm) LF driver and one 1″ (25 mm) HF compression driver.

Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V.

Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts continuous, 160 Watts peak, LF: 400 Watts continuous, 1,600 Watts peak; passive: 400 Watts continuous, 1,600 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 96 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 128 dB, LF: 128 dB; passive: 128 dB. Dimensions: 655 mm high x 374 mm wide x 340 mm deep (25.8″ x 14.7″ x 13.4″). Net weight: 19.6 kg (43.1 lbs).

The loudspeaker system shall be the TURBOSOUND NuQ122. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.


  • 2 way full range loudspeaker for portable PA and installation applications
  • 400 Watts continuous, 1,600 Watts peak power
  • Ideal for FOH, side fill and monitor applications
  • 12″ low frequency driver with low mass voice coil for improved transient response
  • Aluminium dome 1″ neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • Neutrik speakON* NL4 connectors for reliable long life operation
  • Designed and engineered in the U.K.



Frequency Response55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
Nominal Dispersion70° H x 70° V @ -6 dB points
Directivity Factor (Q)9.4
Directivity Index (DI)9.7
Passive400 W continuous, 1,600 W peak
Bi-ampLF: 400 W continuous, 1,600 W peak HF: 40 W continuous, 160 W peak
Sensitivity96 dB (1 W @ 1 m)
Passive122 dB continuous, 128 dB peak
Bi-AmpLF: 122 dB continuous, 128 dB peak HF:122 dB continuous, 128 dB peak
Passive8 O
Bi-AmpLF: 8 O HF: 6 O
Crossover TypePassive / bi-amp switchable
Components1 x 12″ (316 mm) LF driver
1 x 1″ (25 mm) HF compression driver


Connectors2 x Neutrik speakON NL4
PassivePins 1+ / 1- input, pins 2+ / 2- link
Bi-AmpPins 1+ / 1- LF, pins 2+ / 2- HF
Dimensions (H x W x D)655 x 374 x 340 mm (25/8 x 14.7 x 13.4″)
Net Weight19.6 kg (43.1 lbs)
Construction15 mm (5/8″) birch plywood
FinishSemi matt black paint
GrillePowder coated perforated steel
Flying HardwareM10 x 12 points