Turbosound NuQ152-AN-WH ลำโพง
Turbosound NuQ152-AN-WH ลำโพง
Turbosound NuQ152-AN-WH ลำโพง
Turbosound NuQ152-AN-WH ลำโพง

NuQ152-AN-WH

รหัสสินค้า: NuQ152-AN-WH ประเภท: ลำโพง

ตู้ลำโพง 15 นิ้ว 2 ทาง 2,500 วัตต์ มีแอมป์ในตัว คลาส D

ราคาปกติ 0 บาท

ราคา 44,950 บาท

--Infinity% OFF

*ส่วนลด -44,950 บาท

บริการขนส่ง Shipping Provider
ซื้อสินค้า, สอบถามข้อมูล, เช็คสต๊อค Order Channel

Free Shipping

จัดส่งฟรี ทั่วประเทศ

Free Tech Support

รับคำปรึกษาด้านเทคนิคจากผู้เชียวชาญ

Free Product Warranty

การรับประกัน

*หมายเหตุ

  • กรุณาเช็ค Stock สินค้ากับเจ้าหน้าที่ ก่อนสั่งซื้อทุกครั้ง
  • ไม่สามารถนำส่วนลดเปลี่ยนเป็นเงินสดได้
  • หากมีการเปลี่ยนแปลงโปรโมชั่น ทางบริษัทของสงวนสิทธิ์ในการที่ไม่ต้องแจ้งให้ทราบล่วงหน้า

รายละเอียดสินค้า

NuQ152-AN

The 2 way full range NuQ152-AN is a 2,500 Watt 15″ powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ152-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ152-AN loudspeaker features a carbon fibre loaded 15″ low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1″ neodymium high frequency compression driver, which is mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide.

Output power for the NuQ152-AN is provided by means of an efficient and lightweight KLARK TEKNIK 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ152-AN via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matte black paint, the trapezoidal cabinet is constructed from 15 mm (5⁄8″) birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ152-FY flying yoke kit provides added flexibility in permanent install applications (available separately). The NuQ152-AN also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON* connector.

Architecture & Engineering Specifications

The loudspeaker shall be of the full range, two-way, powered type, consisting of one 15″ (394 mm) LF driver and one 1″ (25 mm) HF compression driver.

Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Maximum amplifier output power shall be 2,500 Watts peak, independent of limiters and driver protection circuits. Maximum SPL (peak), measured at 1 metre with music program, shall be 133 dB. Dimensions: 712 mm high x 430 mm wide x 385 mm deep (28″ x 16.9″ x 15.2″). Net weight: 23.6 kg (52.0 lbs).

The loudspeaker system shall be the TURBOSOUND NuQ152-AN. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

คุณสมบัติ

  • 2 way full range powered loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring Klark Teknik Class-D technology
  • Klark Teknik Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • Carbon fibre loaded 15″ low frequency driver with inside/outside coil
  • Aluminium dome 1″ neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • Mains input on Neutrik powerCON* connector
  • Designed and engineered in the U.K.

สเปค

System

Frequency Response55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
Nominal Dispersion70° H x 70° V @ -6 dB points
Maximum SPL133 dB peak
Crossover TypeActive
Transducers1 x 15″ (393.5 mm) LF driver
1 x 1″ (25.4 mm) HF compression driver
LimiterIndependent HF, LF, peak and rms

Amplifier

Maximum Output Power*2,500 W
TypeClass-D
ProtectionShort circuit, thermal

Connectors

INPUT/LINK 
Sensitivity+4dBu or +14 dBu software switchable
Input impedance40 kO balanced
Maximum input level+22 dBu
Ultranet input/link2 x RJ45
Mains SupplyNeutrik powerCON 20A†

Controls

DSPRotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions

Factory EQ PresetsPositioning, Sound mode, FBQ
DisplayLCD 128 x 32, blue, backlit
Delay0 – 300 ms
EqualisationHigh and low shelving EQ 2 x parametric EQ
LimiterZero attack input limiter
Presets20 total presets, 19 user-definable
CrossoverHigh Pass L-R 24 dB/oct
ProtectionLock-out function for all settings

Ultranet Digital Network

DIGITAL PROCESSING 
A/D conversion24-bit, 44.1/48kHz sample rate
Converter type24-bit, delta-sigma
SYSTEM 
Signal16 channels
Latency< 0.9 ms
Frequency response20 Hz to 20 kHz (+0 / -3 dB)
Dynamic rangetypical 92 dB
CABLING 
CablesShielded CAT5
Cable lengthmax. 246 ft / 75 m recommended

Power Supply

VOLTAGE (FUSES) 
Power consumption90 W @ 1/8 max power
USA / Canada120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe220-240 V~, 50/60 Hz (T 10 A H 250 V)
Korea / China220-240 V~, 50/60 Hz (T 10 A H 250 V)
Japan100 V~, 50/60 Hz (T15 A H 250 V)

Enclosure

Dimensions HWD712 x 430 x 385 mm (28.0 x 16.9 x 15.2″)
Net weight23.6 kg (52.0 lbs)
Construction15 mm (5/8″) birch plywood
FinishSemi matt black paint
GrillePowder coated perforated steel
Flying hardwareM10 x 8 points